Technology

The manufacturing process of aluminum electrolytic capacitors is mainly for the slitting, nailing, impregnation, assembly, casing, aging, testing of positive foil, negative foil, electrolytic capacitor paper, etc.

The electrolyte as the negative electrode needs to be loaded, and at the same time, it is also necessary to add a physical barrier between the positive and negative foil to prevent the collision between…

The positive electrode of the aluminum electrolytic capacitor is made into an uneven corrosive foil, and the dielectric film also needs to be in close contact with the uneven positive or negative foil, and there…

The aluminum foil must also be pre-treated before it can be anodized to form a dielectric film. One of the purposes of pre-treatment is to make the surface state of the aluminum foil as pure…

Corrosion is essentially an electrochemical process, and the one that affects aluminum foil corrosion is an intrinsic factor related to the aluminum metal itself, such as the nature, composition, and structure of aluminum; The second…

If the voltage is applied in the opposite direction, the circuit will be short-circuited and the capacitor will be damaged. In circuits with unknown or uncertain polarity, use bipolar aluminum electrolytic capacitors.

The basic structure of general-purpose aluminum electrolytic capacitors is a foil-wound type. The anode is aluminum metal foil, and the medium is the valve metal oxide film Al2O3 formed on the surface of the anode metal…

The physical concept of a capacitor is that it consists of two conductive electrode plates with a discrete element of a substance with dielectric characteristics placed in the middle. The substances with dielectric characteristics referred…